Barebones Special
Your Low Cost PCB Alternative Cut your project time and costs to the very minimum!
Specifications
- 2-Layer, FR-4, 0.062" Thick.
- Plated Or Non-Plated Holes (If No Specifications Provided, Holes Will Be Plated).
- 5-mil Line/Gap Minimum.
- Tin Finish Over 1-oz Copper.
- No Internal Routing (Cutouts) And No Scoring, Tab Rout, Or Drilled Hole Board Separations.
- If Overall Height Or Length Is Less Than 1 Inch, Board Will Be Increased To 1 Inch And Routed As A Rectangle.
- No Solder Mask.
- No Legend.
- Min Size 1.0" X 1.0".
- Max Size 10" X 16" (160 Sq. In.).
- Gerber 274X Preferred.
- Excellon Drill (English Units).
- Minimum Hole Size 0.010.
- Maximum 50 Drilled Holes Per Sq. Inch.
**Advanced PCB will choose the color/surface finish of the surface finish, solder mask, and silkscreen.